Electronic Gearshift Kit for Aprilia RS457 – Quickshift 2S002193 + UpMap T800+

Electronic Gearshift Kit for Aprilia RS457 – Quickshift 2S002193 + UpMap T800+

Product Description

The electronic gearshift kit for Aprilia RS457 combines the Quickshift 2S002193
and the UpMap T800+ to activate the quickshifter on your bike quickly and efficiently.
The synergy between the shift sensor and the dedicated ECU remap ensures faster, smoother gear changes, enhancing the riding experience without invasive modifications.

What’s included

• Quickshift 2S002193 – gearshift sensor designed for seamless upshifts without clutch use under acceleration.
• UpMap T800+ – interface to remap the ECU and enable the quickshifter function, managed via iOS/Android app over Bluetooth.

Main Benefits

• Continuous acceleration: shift without closing the throttle.
• Better control and precision when engaging gears.
• Plug-and-play installation: designed specifically for RS457, no structural changes required.
• Optimized setup: dedicated mapping with UpMap to fully exploit the quickshift system.

Compatibility

• Aprilia RS457 (from 2024 onwards)

Compatibility with other models is not guaranteed.

Installation & Resources

1. Install the Quickshift 2S002193 sensor following the correct torque specs and orientation.
2. Connect the UpMap T800+ to the OBD port, and back up the original ECU map.
3. Load the dedicated RS457 map from the UpMap app and complete the guided procedure.
4. Perform a final check and a road/track test to verify correct quickshifter operation at higher RPMs.

Updated manuals available at: gabroracing.com/manuals

FAQ – Frequently Asked Questions

Is the UpMap required to activate the quickshifter?
Yes, the UpMap T800+ is required to properly enable and optimize the quickshifter function on RS457.

Does the quickshifter work on downshifts?
The system is primarily designed for upshifts. For downshifts, it is recommended to use the clutch for maximum smoothness.

Can the UpMap be reused on another bike?
No. Once paired, the UpMap T800+ is permanently locked to the VIN of the vehicle.

Is the installation reversible?
Yes. The installation is plug-and-play and you can restore the original configuration at any time.

Warnings

Warning: the use of dedicated maps is intended for track use or closed-course areas only.
Always check local regulations and the bike’s setup before road use.

Only the best for your Aprilia!

With the Electronic Gearshift Kit for RS457, you gain a real upgrade in gear engagement speed and riding quality,
with components specifically designed for your bike and electronic management tailored to your Aprilia.